Software
Network
There are various challenges in factories such as reducing machine down time, improving production management and increasing machining setup effi ciency. Mori Seiki proposes fi ve solutions to address such challenges based on our original networking application.
Remote Maintenance/Machine Operation Monitoring Service
Customer support service to provide the remote maintenance service by the Mori Seiki Service Center and to enable monitoring of machines by the customer through combined use of the Internet and LAN.
Remote alarm support
When an alarm goes off, an alarm notification will be sent to the Mori Seiki Service Center simply by pressing the "Send E-mail" button on MAPPS. Mori Seiki service personnel will remotely diagnose the cause of the problem, and quickly provide solutions for machine recovery.
(This service may not be available in some areas. For details contact Mori Seiki.)
• Features
- ・Support service utilizing the Internet connection
- ・Reliable remote maintenance service provided by the Mori Seiki Service Center
- ・Powerful support utilizing high-speed/large-capacity network
- ・Download various data from the server located at Mori Seiki
- ・No server installation is required — reduction in initial cost
- ・Operating status check through the Internet
Machine Operation Monitoring System
This software is designed for establishing a network system that allows you to collect and manage operating information of multiple machines, and to distribute the information to machines, operators and administrators. Its operation management function, even more enhanced than MORI-NET Global Edition Advance, considerably improves the production efficiency of the factory as a whole.
• Features
- ・Intra-corporate network system without external connection
- ・Up to 30 machines can be connected with one server
- ・The operating status of your machines can be centrally managed in real time
Application for establishing an efficient production environment
by connecting a personal computer to machines
This enables high-speed transfer of programming data between your office computer and machine, reducing the lead time of pre-machining processes.
• Direct communication between the PC and machine
The data created using the PC can be transmitted to the machine immediately.• Centralized management of programs
Programs stored in the machines can be collected to the PC.• Possible to communicate with multiple machines
Input and output of data from a single machine to multiple machines is possible through LAN.• Easy backup operation
Data files in the machines can be backed up to the hard disk of the PC.• Rapid data transfer
Input and output of large-capacity data through LAN can be done in a few seconds.
This is an application which allows you to remotely operate and view the MAPPS screens from your office computer. Work, such as checking the status of machines and dealing with problems, has been taken off the factory floor and put in the office.
• Machine registration (max. 100 registered machines)
Multiple machines can be registered and the list of registered machines is displayed on the screen. Select a machine from the list to view that machine's screen.• Message sending function
This function enables you to send simple messages to another machine. (LAN connection is required.)• Log-in function
This function enables MAPPS operation from the PC that has logged in only. It is also possible to lock operations on the MAPPS side.• IP address entry
Browse unregistered machines by directly entering their IP address and a password.• Auto-reload
Watch as the MAPPS screen changes almost in real time.*Remote operation of the MAPPS operation panel functions is not possible for safety reasons.